- MILITARY
- WEAPONS TARGETING
- SHIPS NAVIGATION
- POSITION SIMULATION
- RADAR CONTROL
- AEROSPACE
- SENSOR SIMULATION
- REMOTE CONTROL
- TEST AND VERIFICATION
- LINEAR POSITIONING
- SCIENTIFIC
- ANTENNA POSITIONING
- POSITION SENSING
- MULTI-AXIS CONTROL
- DATA ACQUISITION
INTRODUCTION
The CommandNet Series of data acquisition and simulation devices integrate our field-tested, and proven Computer Conversions Corporation Converters. The system supports numerous transducer types including Synchro/Resolver/RVDT/LVDT. Input and output converters are available from 12bit to 16bit with frequencies ranging from 60Hz to 10Khz, for a maximum of 8 total channels.*
The CommandNet units are capable of receiving digital input via Ethernet and converting the digital input to 4 analog outputs. All analog I/O signals are fully transformer isolated. Due to the use of ruggedized sealed enclosures, these units are ideally suited for both military and industrial applications. Various Ethernet transmission protocols can be specified with ModBus TCP being standard.
Computer Conversions’ line of standard Synchro / Resolver / RVDT / LVDT / 4-20ma input or output type converters may be used to populate the system board. Input and Output converters may be mixed on the system board, increasing flexibility. These units also support Multi-speed or Multi-turn I /O. Specific unit functions are configurable by part number.
*see datasheet
FEATURES
• 19" Rackmount or Vibration Isolated Bulkhead Mount
• No Operating System Required
• Dual Independent Ethernet Ports
• 120VAC POWER
• Fanless Design
• IP67 Sealed Enclosure
• Fully EMI Shielded
• Sealed Connectors
• Internal and External Shock Mount System
• Multi-Channel Transducer Interface
• Supports Synchro/Resolver/RVDT/LVDT
• Fully Customizable Read / Write Channels
• Demonstration Software Included ( Designed to meet MIL-STD-810G, MIL-STD-461F and IP67 )
- Synchro to Digital
- Resolution:10 to 16 bit
- Accuracy:+/-40 arc seconds 16 bit
- Reference Inputs:11.8Vrms, 26Vrms, 115Vrms L-L
- 47 to 10,000 Hz.
- Signal Inputs:11.8, 26, 40, 90V.L-L.
- Options: Multispeed synchro input
- Digital to Synchro
- 1.2VA through 5VA Models
- Short Circuit, Transient and Thermally Protected Outputs with Isolation
- Self-Powered off the AC Reference Input
- High Accuracy, 10-16 Bit Resolution
-
- Digital to Synchro
- (Reference Powered)
- Only +5V DC Input Power Required
- Parallel Binary Angle Input
- No +15V DC Supplies Needed
- CMOS & TTL Compatible
- 14 or 16 Bits Natural Binary Angle Data Input
- Resolver to Digital
- Resolution:10 to 16 bit
- Accuracy:+/-40 arc seconds 16 bit
- Reference Inputs:11.8Vrms, 26Vrms, 115Vrms L-L
- 47 to 10,000 Hz.
- Signal Inputs:11.8, 26, 40, 90V.L-L.
- Options: Multispeed input
- Digital to Resolver
- 1.2VA through 5VA Models
- Short Circuit, Transient and Thermally Protected Outputs with Isolation
- Self-Powered off the AC Reference Input
- High Accuracy, 10-16 Bit Resolution
- 11.8V and 26V Outputs Standard
- Digital to LVDT/RVDT
- 3V and 5V logic Compatible
- 2 or 3-4 wire output configurations
- High Drive Capability of up to 2000 ohms
- virtually Indestructible Short-Circuit Proof outputs
- 3V to 28V Reference Inputs Typical
Customization
As a leader in the motion control industry for over 50 years Computer Conversions Corporation can customize a synchro / resolver data acquisition solution, or synchro / resolver simulation solution for your specific application. Whether you're using non-standard reference signals, high output power, or require a special combination of input and ouput devices, we are here to work with your engineering staff to develop a custom solution for your company.
Contact Our Team:
sales@computerconversions.com
(631) 261-3300
Sub-Categories
There are currently no sub-categories for this product.
|
|
